At Chemical Bund, we design, install, and maintain containment systems that help industrial facilities in Greater London and across the UK meet environmental protection obligations. Our bunded systems prevent hazardous spills, reduce pollution risk, and ensure full compliance with chemical storage regulations.

Whether you manage a manufacturing plant, fuel depot, agricultural site, or chemical processing facility, Chemical Bund provide custom containment solutions built to safeguard people, property, and the environment.

Why Are Chemical Bunds Critical for Environmental Safety in Greater London Facilities?

Chemical bunds are essential for preventing hazardous substances from escaping into the environment from various industrial sites in Greater London.

Where many industrial sites handle oils, acids, fuels, or other pollutants, bunded containment is a legal requirement for environmental safety. A properly specified bund acts as a secondary barrier in the event of a leak, spill, or overfill, protecting soil, groundwater, and nearby watercourses in Greater London.

Without adequate bunding, even a small release can cause significant contamination and result in enforcement action, costly clean-up, or long-term reputational damage.

What Types of Containment Systems Are Typically Supplied Across Greater London?

We supply a wide range of chemical bund systems in Greater London to meet various storage, containment, and regulatory requirements, including:

• Precast concrete bunds – Factory-made units for fast installation and robust secondary containment.
• In-situ cast concrete bunds – Custom-poured structures tailored to complex site layouts or large tank farms.
• GRP bunds – Lightweight, corrosion-resistant options ideal for aggressive chemical environments.
• Steel bunded tanks – Integrated primary and secondary containment systems for fuels and hazardous liquids.
• Modular containment trays – Scalable plastic or steel units for drums, IBCs, and dosing equipment.
• Portable bunds – Flexible, relocatable containment for temporary setups or mobile plant.
• Bunded floors with interceptors – Integrated spill control systems with drainage and filtration capabilities.
• Elevated bunded bases – Raised tank platforms with internal linings for improved inspection and durability.

How Much Should You Expect to Pay for a Chemical Bund Installation Near Greater London?

The cost of chemical bund installation in Greater London ranges from £1,000 to over £50,000, depending on the size, materials, and level of chemical resistance required.

Costs are primarily influenced by factors such as bund volume, construction type (steel, concrete, or resin-lined), site layout, drainage systems, and compliance with environmental regulations.

Additional expenses may apply for custom bund designs, site surveys, access considerations, or repair and upgrade works.

Contact Chemical Bund in Greater London to get customised prices for installing a bund at your facility.

Can Custom-Built Chemical Bunds Be Designed for Unique Sites in the Greater London Area?

We provide fully bespoke chemical bund design services for clients throughout Greater London. Many industrial sites require bunds that fit around existing infrastructure, accommodate multiple tanks, or meet enhanced environmental performance criteria.

We tailor each bund to your storage volumes, site layout, and chemical compatibility requirements. Our Greater London design team considers access for maintenance, drainage and rainwater control, and fire separation when developing site-specific solutions. Where required, bunds can be retrofitted into confined spaces or fabricated off-site and craned into position to reduce installation time.

How Do Companies Within Greater London Ensure Their Chemical Bunds Are Industry-Compliant?

To ensure compliance with chemical bund industry standards, companies in Greater London must first confirm that their bunds provide 110% capacity of the largest container (or 25% of the total volume stored, whichever is greater).

Bunds must be liquid-tight, resistant to stored substances, and free from outlets or cracks that could cause leakage. Many sites also require regular inspection, bund lining upgrades, or bund integrity testing to meet insurer and regulator expectations.

We provide detailed compliance audits, bund certification, and remedial works in Greater London to ensure your containment systems meet or exceed current industry and environmental requirements.

What’s the Standard Process for Installing a Chemical Bund on Industrial Premises Across Greater London?

The installation process of chemical bunds in Greater London begins with a site survey to assess storage requirements, ground conditions, and regulatory needs. Following the design stage, ground preparation and concrete works are carried out—either through casting in situ or installing precast elements.

For GRP or steel bunds, fabrication may be done off-site in Greater London and then assembled on location. Once the structure is in place, linings or coatings are applied to enhance chemical resistance. Final steps include installing any sump pumps, drainage isolation systems, and protective barriers.

Are GRP, Concrete, or Steel Bunded Systems More Common in High-Risk Zones Around Greater London?

In high-risk zones across Greater London, concrete chemical bunds are most common due to their structural strength and fire resistance.

GRP bunds are often used where high chemical resistance and quick installation are required, especially for acids, alkalis, or aggressive solvents. Steel bunds, often integrated with above-ground tanks, are frequently used in fuel depots or mobile storage systems.

We assess risk level, operational use, and regulatory classification to specify the most appropriate material system for each project in Greater London.

Which Regulations Govern Chemical Bund Compliance for Sites Operating in or Around Greater London?

We ensure all chemical bund installations in Greater London meet the latest regulatory and environmental standards, including:

• Control of Pollution (Oil Storage) (England) Regulations 2001 – Sets legal requirements for oil storage containers over 200 litres, including mandatory secondary containment.
• Environmental Permitting Regulations 2016 – Requires appropriate pollution control measures, including bunding, for sites with environmental permits.
• CIRIA Report C736 – Industry best-practice guidance for the design and specification of containment systems for hazardous liquid storage.
• PPG 2 (Pollution Prevention Guidelines) – Outlines best practices for oil storage and the use of secondary containment to prevent pollution incidents.
• COMAH Regulations – Applies to high-risk sites storing dangerous substances; bunding must prevent escalation of major accidents.
• COSHH Regulations – Requires control measures, including bunding, to protect health when handling hazardous substances.
• Devolved legislation (Scotland and Wales) – Specific bunding and containment requirements as enforced by SEPA and NRW for local compliance.

How Frequently Should Chemical Bunds Be Maintained on Facilities Based in Greater London?

Chemical bunds in Greater London should be inspected at least annually, with maintenance carried out as needed to repair damage, remove debris, or reapply protective coatings.

Some sites—particularly COMAH or high-throughput facilities—require more frequent checks, including monthly visual inspections and annual integrity testing. Bund linings may degrade over time, especially under UV exposure or chemical attack, so re-coating may be necessary every 5 to 10 years.

We offer planned maintenance programmes, condition reports, and emergency repair services to help ensure bunds remain effective and compliant year-round.

Contact Chemical Bund in Greater London for a consultation on the best chemical bund maintenance practices.

Find More Info

Make sure you contact us today for a number of great chemical bund services in London.

Here are some towns we cover near Greater London

Westcombe Park, Woolwich, Greenwich, Isle of Dogs, Blackheath

For more information on Chemical Bund in Greater London , fill in the contact form below to receive a free quote today.